Super 70 Stainless

The 7in monster is here, the Super 70 can take up to 9in props (depending on configuration) and has insanely durable 16mm thick arms that are only 7.5mm wide. This frame was designed to maximize Street League spec, but is open to endless possibilities from racing to long range and filming.

Get 3D print and open source files here: https://www.printables.com/model/387325-speedsource-super-70

• 16mm thick arms - all plates are 3mm thick
• Stainless Steel Mid Plate - Battery Plate and Bottom plates are Carbon Fiber
• Maximize Center of Gravity - weight is stacked in the middle
• Superior aerodynamic performance
• M4 hardware
• Easy build that locks screws - no need to constantly tighten or worry about stripping

• 20x20 or 30x30 mounting - can mount in the middle of the frame, on the top/bottom, and on the bottom plate
  • Recommended to mount FC, ESC, RX in the middle of the frame - VTX on the bottom (10mm of build height with standard configuration on bottom)
• Configurable for top mount or bottom mount battery - see printables for examples - more configurations to come!
• up to 9in propellers (need to remove some material with CG canopy versions)
• 19mm motor mounting
• Arms lock in and use 3 screws for maximum strength

• x10 - M4 x 25mm countersunk screw
• x4 - M4 x 16mm countersunk screw
• x12 - M4 steel nut
• x16 - M3 x 20mm socket head screw (motor screws)
• x2 - M4x30mm screws

Prints Included (always with canopy or separate when a TPU color is selected)

• x2 - Arm Guards
• Front Aero Blocker
• Aero bottom cover
• Antenna mounts

How to assemble the frame: https://www.youtube.com/watch?v=6ITOxnwIMk4&t=34s